PBV20N2 PBV20N2 Service Service ManualManual
PARAMETER DESCRIPTION
PARAMETER DESCRIPTION
Max speed FWD PIN2Max speed FWD PIN2
MAX SP. FW PIN2MAX SP. FW PIN2
Maximum speed forward with PIN code 2.Maximum speed forward with PIN code 2.
Max speed REV PIN 1Max speed REV PIN 1
MAX SP. BK PIN1MAX SP. BK PIN1
Maximum speed backwards with PIN code 1.Maximum speed backwards with PIN code 1.
Max speed REV PIN 2Max speed REV PIN 2
MAX SP. BK PIN2MAX SP. BK PIN2
Maximum speed backwards with PIN code 2.Maximum speed backwards with PIN code 2.
Max speed REV PIN 3Max speed REV PIN 3
MAX SP. BK PIN3MAX SP. BK PIN3
Maximum speed backwards with PIN code 3.Maximum speed backwards with PIN code 3.
Max speed reverseMax speed reverse
MAX SPEED BACKMAX SPEED BACK
This parameter controls the maximum speedThis parameter controls the maximum speed
backward in the standard drive mode.backward in the standard drive mode.
Value range:Value range:
•
• 10%: Slowest10%: Slowest
•• 100%: Fastest100%: Fastest
NOTE:NOTE:For safety reasons, do not exceed theFor safety reasons, do not exceed the
parameter table value!parameter table value!
Maximum load speed cutbackMaximum load speed cutback
MAX SPEED LOADMAX SPEED LOAD
This parameter controls the maximum speedThis parameter controls the maximum speed
forward with maximum load in percentage offorward with maximum load in percentage of
absolute maximum driving speed.absolute maximum driving speed.
Value range:Value range:
•
• 10%: Slowest10%: Slowest
••
100%: Fastest100%: Fastest
NOTE:NOTE:For safety reasons, do not exceed theFor safety reasons, do not exceed the
parameter table value!parameter table value!
Maximum load weightMaximum load weight
MAX LOAD WEIGHTMAX LOAD WEIGHT
This parameter controls the maximum load of theThis parameter controls the maximum load of the
truck.truck.
NOTE:NOTE:This parameter is used only if This parameter is used only if the truck isthe truck is
equipped with the pressure sensor option!equipped with the pressure sensor option!
Proportional valve closing rampProportional valve closing ramp
EVP CLOSE DELAYEVP CLOSE DELAY
This parameter controls the proportional valveThis parameter controls the proportional valve
closing delay ramp.closing delay ramp.
Value range:Value range:
•
• 0.1: Fastest0.1: Fastest
•
• 12.75: Slowest12.75: Slowest
Proportional valve opening rampProportional valve opening ramp
EVP OPEN DELAYEVP OPEN DELAY
This parameter controls the proportional valve openThis parameter controls the proportional valve open
delay ramp.delay ramp.
Value range:Value range:
•
• 0.1: Fastest0.1: Fastest
•
•
12.75: Slowest12.75: Slowest
To Next Page
Loading...
