PBV20N2 PBV20N2 Service Service ManualManual
Figure 86. Throttle curve adjustmentFigure 86. Throttle curve adjustment
Table 8. Submenu: set optionsTable 8. Submenu: set options
PARAMETER DESCRIPTION
PARAMETER DESCRIPTION
A14 FUNCTIONA14 FUNCTION
Input A14 functionalityInput A14 functionality
This parameter controls the functionality of theThis parameter controls the functionality of the
multipurpose input (XA1_A/14).multipurpose input (XA1_A/14).
Value range:Value range:
•
• NONE: No functionalityNONE: No functionality
•• OPTION #1: Battery lockOPTION #1: Battery lock
•
•
OPTION #2: Speed cutbackOPTION #2: Speed cutback
NOTE:NOTE:This parameter is used only if This parameter is used only if the truck isthe truck is
equipped with the battery lock sensor option!equipped with the battery lock sensor option!
BATTERY CHECKBATTERY CHECK
Option: Battery checkOption: Battery check
This parameter controls the specification of lowThis parameter controls the specification of low
battery charge detection.battery charge detection.
Value range:Value range:
•
•
0: Nothing happens, the battery charge level 0: Nothing happens, the battery charge level isis
calculated but no action is taken calculated but no action is taken when thewhen the
battery is discharged.battery is discharged.
•
•
1: Lift cut out 1: Lift cut out when the BATTERY LOW alarm iswhen the BATTERY LOW alarm is
activated.activated.
•
• 2: Traction speed reduction to 24% when the2: Traction speed reduction to 24% when the
BATTERY LOW alarm is activated.BATTERY LOW alarm is activated.
EPSEPS
Option: Electric steeringOption: Electric steering
This parameter defines whether electrical steering isThis parameter defines whether electrical steering is
on or off.on or off.
Value range:Value range:
•
•
ABSENT: OffABSENT: Off
••
PRESENT: OnPRESENT: On
HOUR COUNTERHOUR COUNTER
Option: Hour meterOption: Hour meter
Factory setting.Factory setting.
To Next Page
Loading...
