© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
196 (244)196 (244)
PBV20N2 PBV20N2 Service Service ManualManual
Figure 97. Pressure sensor overviewFigure 97. Pressure sensor overview
15.6.1 15.6.1 Installation Installation of of the the pressure pressure sensorsensor
CAUTIONCAUTION
Always use the correct schematic diagram for the Always use the correct schematic diagram for the specific model you are servicing. Thespecific model you are servicing. The
latest schematic diagrams are available from the manufacturer’s Web site.latest schematic diagrams are available from the manufacturer’s Web site.
1.1. Disconnect the hydraulic oil hoseDisconnect the hydraulic oil hose
from the connector.from the connector.
2.2. Install a T-fitting between theInstall a T-fitting between the
hydraulic oil hose and the hydraulic oil hose and the connector.connector.
3.3. Install the pressure sensor to the T-Install the pressure sensor to the T-
fitting.fitting.
4.4. Connect the pressure sensor wires according to the truck Connect the pressure sensor wires according to the truck model specificmodel specific
schematic diagram.schematic diagram.
To Next Page
Loading...
