Mitsubishi PBV20N2 - Page 50



© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
50 (244)50 (244)

PBV20N2 PBV20N2 Service Service ManualManual
5.6.2 5.6.2 Removing Removing the the operator’s operator’s platform platform slide slide bearingbearing
Figure 31. Operator’s platform slide bearing overviewFigure 31. Operator’s platform slide bearing overview
1.1. Remove the operator’s platform from the truck frame. For Remove the operator’s platform from the truck frame. For instructions, see theinstructions, see the
sectionsection5.6.5.6.
2.2. Remove the support at the base ofRemove the support at the base of
the operator’s platform.the operator’s platform.
3.3. Remove the operator’s platform gasRemove the operator’s platform gas
spring. For instructions, see sectionspring. For instructions, see section
5.6.1.5.6.1.
4.4. Remove the shaft locking screw.Remove the shaft locking screw.
5.5. Remove the shaft.Remove the shaft.
6.6. Remove the mounting bracket.Remove the mounting bracket.
7.7. Remove the slide bearing.Remove the slide bearing.
https://www.forkliftpdfmanuals.com/