© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
52 (244)52 (244)
PBV20N2 PBV20N2 Service Service ManualManual
5.85.8 Bogie bearingBogie bearing
Figure 33. Bogie bearing overviewFigure 33. Bogie bearing overview
There is no need to There is no need to change the bogie bearing lubricant during the truck's lifetime.change the bogie bearing lubricant during the truck's lifetime.
During maintenance, check the During maintenance, check the following:following:
•
• The bearing rotates easily when the traction wheel is raised up.The bearing rotates easily when the traction wheel is raised up.
••
The drive unit’s The drive unit’s mounting bolts are tightened properly.mounting bolts are tightened properly.
5.95.9
Traction wheelTraction wheel
CAUTIONCAUTION
Before installing the traction wheel, make sure that Before installing the traction wheel, make sure that the wheel shaft, the face of the wheel shaft, the face of the rimthe rim
mounting, the wheel nuts and wheel bolts are mounting, the wheel nuts and wheel bolts are clean, free from grease and undamaged.clean, free from grease and undamaged.
NOTE: To access the traction wheel, lift the NOTE: To access the traction wheel, lift the truck up (see the correct lifting points intruck up (see the correct lifting points in
the sectionthe section5.15.1 of this manual) and turn the transmission gear so that there is enoughof this manual) and turn the transmission gear so that there is enough
space for you to access and remove the wheel.space for you to access and remove the wheel.
To Next Page
Loading...
