© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
64 (244)64 (244)
PBV20N2 PBV20N2 Service Service ManualManual
5.145.14 Disassembly of the drive unit suspensionDisassembly of the drive unit suspension
WARNINGWARNING
When you lift the truck up, When you lift the truck up, make sure that you support it make sure that you support it properly to prevent it fromproperly to prevent it from
falling.falling.
NOTE: If the truck NOTE: If the truck is equipped with the electrical steering option, you need tois equipped with the electrical steering option, you need to
disassemble the electrical steering motor unit first before you can perform the stepsdisassemble the electrical steering motor unit first before you can perform the steps
provided bprovided below. For moelow. For more informre information abouation about the disassemt the disassembly of the electrbly of the electrical steeringical steering
motor unit, see sectionmotor unit, see section15.11.5.15.11.5.
Figure 41. Drive unit suspension overviewFigure 41. Drive unit suspension overview
1.1. Motor bedMotor bed
2.2. Motor bed frameMotor bed frame
3.3. Motor connectorMotor connector
4.4.
Power cablePower cable
5.5. Cable mounting bracketCable mounting bracket
6.6. SpringSpring
7.7. Tub pinTub pin
8.8. ShaftShaft
9.9.
Slide bearingSlide bearing
To Next Page
Loading...
