© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
66 (244)66 (244)
PBV20N2 PBV20N2 Service Service ManualManual
9.9. Push out the tub pins above thePush out the tub pins above the
motor bed.motor bed.
10.10. Push out the shafts connecting thePush out the shafts connecting the
top part of the motor bed to thetop part of the motor bed to the
motor bed frame.motor bed frame.
11.11. Remove the slide bearings.Remove the slide bearings.
12.12. Tilt the motor bed forwardTilt the motor bed forward
approximately 45 degrees.approximately 45 degrees.
13.13.
Push out the tub pins beneath thePush out the tub pins beneath the
motor bed.motor bed.
14.14. Push out the shafts connecting thePush out the shafts connecting the
lower part of the motor bed to thelower part of the motor bed to the
motor bed frame.motor bed frame.
15.15. Remove the slide bearings.Remove the slide bearings.
To Next Page
Loading...
