© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
86 (244)86 (244)
PBV20N2 PBV20N2 Service Service ManualManual
Figure 50. Tiller head overviewFigure 50. Tiller head overview
1.1. Tiller headTiller head
2.2. ConnectorConnector
3.3. Tiller head fixing screwTiller head fixing screw
4.4. Logo plateLogo plate
1.1. Remove the logo plate.Remove the logo plate.
2.2. Remove the tiller head fixing screw.Remove the tiller head fixing screw.
3.3. Lift the tiller head carefully upwardsLift the tiller head carefully upwards
until you can feel the connectoruntil you can feel the connector
wires tightening. Be careful not towires tightening. Be careful not to
damage the wiring. When pulling thedamage the wiring. When pulling the
tiller head up, note that the pipetiller head up, note that the pipe
edges are sharp and may cut you.edges are sharp and may cut you.
To Next Page
Loading...
