1 System Structure
2
Supported Device Addresses
3 Consecutive Device Addresses
4 Environment Setup
5 I/O Manager Configuration
6 Driver Configuration
7 Protocol Configuration
8 Device Address Configuration
Mitsubishi Electric
Melsec-Q
Ethernet (UDP) Driver
• This manual explains how to connect the target machine with other manufacturer devices. For
information about how to use the Pro-Designer software, please refer to the Pro-Designer Online
Help.
• The types of target machines that are compatible with Pro-Designer depends on the version of
Pro-Designer. For information about the compatibility of target machines, please refer to the
Pro-Designer Online Help.
© 2002 Digital Electronics Corporation. All rights reserved.
To Next Page
