Mitsubishi Q03UD(E)CPU User Manual

9 - 32
9.1 PLC Parameters
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
9
PARAMETERS
Table9.25 Built-in Ethernet por setting list (Continued)
Item Parameter No. Description Setting range Default value Reference
Open settings
1016
H
Set items when the MC protocol
communication function is used.
--- No settings
Section 7.2
Section 7.4
FTP settings
Set items when the File transfer
function (FTP) is used.
--- No settings Section 7.6
Time settings
Set items when the Time setting
function is used.
--- No settings Section 7.5
Enable online change
(FTP, MC protocol)
Specify whether to enable online
change (writing device data or files
while the CPU is in the RUN
status) in the communication using
the MC protocol or the FTP
function.
Checked/Unchecked (Enabled/
Disabled)
Unchecked (Disabled)
Section 7.4
Section 7.6
Disable direct
connection to
MELSOFT
Specify whether to disable
MELSOFT direction connection.
Disable direct connection to
emphasize the security by setting a
remote password.
Checked/Unchecked (Disabled/
Enabled)
Unchecked (Enabled) ---
Do not respond to
search for CPU (Built-in
Ethernet port) on
network
Disable CPU modules connected
to MELSOFT devices for
responding the Find CPU function.
Disable the response to emphasize
the security.
Checked/Unchecked (Disabled/
Enabled)
Unchecked (Enabled) ---

Mitsubishi Q03UD(E)CPU Specifications

General

Brand	Mitsubishi
Model	Q03UD(E)CPU
Category	Controller
Language	English