10
DEVICE EXPLANATION
10.2 Internal User Devices
10 - 8
9
Parameters
10
Device Explanation
11
CPU Module Processing
Time
12
Procedure for Writing
Program to CPU ModuleAppendicesIndex
(3) Memory capacity
Use the following expression to obtain the memory capacity of an internal user device.
(For the Basic model QCPU)
(Bit device capacity) + (Word device capacity) + (Timer, retentive timer and
counter capacity) 16.4k words
(For the High Performance model QCPU, Process CPU, Redundant CPU, Universal
model QCPU)
(Bit devices capacity) + (Word devices capacity) + (Timer, retentive timer and
counter capacity) 29k
(a) For bit devices:
For bit devices, 16 points are calculated as 1 word.
(b) For timer (T) retentive timer (ST), and Counter (C):
For the timer, retentive timer, and counter, 16 points are calculated as 18 words.
(c) For word devices:
As for data register (D), link register (W), and link special register (SW), 16 points
is calculated as 16 words.
POINT
When an internal user device's "number of usable points" setting is changed, the
following files which were created under the previous setting cannot be used as
they are.
• The sequence program
• The SFC program
•ST program
When the number of used internal user device points is changed, read the above
program from the CPU module to GX Developer, and write it to the CPU module
again.
16
(X+Y+M+L+B+F+SB+V+S)
(Bit device capacity) =
(Word)
16
(Timer, retentive, counter capacity) =
(T + ST + C)
18 (words)
16
(D + W + SW)
(Word device capacity) =
16 (words)
To Next Page
Loading...
Need help?
General
