Mitsubishi Q03UD(E)CPU User Manual

APPENDICES
Appendix 3 List of Parameter No.
App - 100
9
Parameters
10
Device Explanation
11
CPU Module Processing Time
12
Procedure for Writing Program to CPU ModuleAppendicesIndex
(Continued on next page)
TableApp.39 List of parameter No.
Item
Parameter No. Referance
Program 7000H
Section 3.3.6
Boot option
Clear program memory
7000
H
Section 5.1.5,
Section 5.2.8,
Section 5.2.9,
Section 9.1.1(6),
Section 9.1.2(8)
Auto Download all Data from Memory card to
Standard ROM
Boot file setting
SFC program start mode 8002H
Section 9.1.1(7),
Section 9.1.2(9)
Start condition 8003H
Output mode when the block is stopped 8005H
Nunber of Ethernet 9000H
Section 9.3(3)
Starting I/O No.
9N00H
Network No.
Group No.
Station No.
Operational settings
Initial settings 9N01H
Section 9.3(3)
Open settings 9N02H
Router relay parameter 9N03H
Station No.<->IP information 9N05H
FTP parameters 9N06H
E-mail settings 9N07H
News setting 9N08H
Interrupt settings 9N09H
Routing parameters 9N04H
Number of modules on CC-Link IE controller network A000H
Section 9.3(1)
Interlink transmission parameters A002H
Routing parameters A003H
Starting I/O No.
ANM0
H
Network No.
Total stations
Station No.
Mode ANM0H
Refresh parameters ANM1H
Setup Common parameters ANM2H
Station inherent parameters ANM3H

Mitsubishi Q03UD(E)CPU Specifications

General

Brand	Mitsubishi
Model	Q03UD(E)CPU
Category	Controller
Language	English