vi
FOREWORD
(10) $GGRQRUPRGLILHGSDUWVDVGHILQHGLQ6HFWLRQEDQGE7LWOHWKDWDUHQRWH[HPSWHGE\
WKH$LU5HVRXUFHV%RDUGPD\QRWEHXVHG7KHXVHRIDQ\QRQH[HPSWHGDGGRQRUPRGLILHGSDUWVVKDOOEH
JURXQGVIRUGLVDOORZLQJDZDUUDQW\FODLPPDGHLQDFFRUGDQFHZLWKWKLVDUWLFOH7KHHQJLQHPDQXIDFWXUHU
VKDOOQRWEHOLDEOHXQGHUWKLVDUWLFOHWRZDUUDQWIDLOXUHVRIZDUUDQWHGSDUWVFDXVHGE\WKHXVHRIDQRQ
H[HPSWHGDGGRQRUPRGLILHGSDUW
(11) The Air Resources Board may request and, in such case, Mitsubishi Heavy Industries, Ltd. shall provide,
any documents which describe that Mitsubishi Heavy Industries, Ltd.'s warranty procedures or policies.
(d) Warranted parts list.
(1) Fuel metering system
(A) Fuel injection system.
(B) Air/fuel ratio feedback and control system.
(C) Cold start enrichment system.
(2) Air induction system
(A) Controlled hot air intake system.
(B) Intake manifold.
(C) Heat riser valve and assembly.
(D) Turbocharger/supercharger systems.
(E) Charged air cooling systems.
(3) Exhaust gas recirculation (EGR) system
(A) EGR valve body, and carburetor spacer if applicable.
(B) EGR rate feedback and control system.
(4) Air injection system
(A) Air pump or pulse valve.
(B) Valves affecting distribution of flow.
(C) Distribution manifold.
(5) Catalyst or thermal reactor system
(A) Catalytic converter.
(B) Thermal reactor.
(C) Exhaust manifold.
(6) Particulate controls
(A) Traps, filters, precipitators, and any other devices used to capture particulate emissions.
(B) Regenerators, oxidizers, fuel additive devices, and any other device used to regenerate or aid in the
regeneration of the particulate control device.
(C) Control device enclosures and manifolding.
(D) Smoke puff limiters.
(7) Advances oxides of nitrogen (NOx) controls
(A) NOx absorbers.
(B) Lean NOx catalysts.
(C) Selective catalyst reduction.
(D) Reductant (urea/fuel) containers/dispensing systems.
(8) Positive crankcase ventilation (PCV) system
(A) PCV valve.
(B) Oil filler cap
To Next Page
Loading...
Need help?
General
