– 25 –
Press the ON/OFF button.
Press the HI/ECO button.
• When the operating mode is AUTO, COOL or HEAT
Every time the HI/ECO button is pressed, the display is switched in the
order of:
(
HIGH POWER
) (ECO)
No display
(Normal operation)
• When the operating mode is DRY or ON TIMER + OFF TIMER
Every time the HI/ECO button is pressed, the display is switched in the
order of:
No display
(ECO) (Normal operation)
HIGH POWER/ECO operation
2
1
HIGH POWER operation
Pressing the HI/ECO button intensifies the operating power and initiates powerful cooling or heating operation for 15 minutes
continuously. The remote control displays and the FAN SPEED display disappears.
• During the HIGH POWER operation, the room temperature
is not controlled. When it causes an excessive cooling or
heating, press the HI/ECO button again to cancel the HIGH
POWER operation.
• HIGH POWER operation is not available during the DRY and
ON TIMER + OFF TIMER operations.
• When HIGH POWER operation is set after setting
ON TIMER operation, HIGH POWER operation will start from
the set time.
• After HIGH POWER operation, the sound of refrigerant
flowing may be heard.
• When the following operations are set, HIGH POWER
operation will be canceled.
1 When the HI/ECO button is pressed again.
(The operation mode will be changed to the ECO operation)
2 When the operation mode is changed.
3 When it has been 15 minutes since HIGH POWER
operation has started.
4 When the 3D AUTO button is pressed.
5 When the SILENT button is pressed.
6 When the NIGHT SETBACK button is pressed.
• Not operable while the air-conditioner is OFF.
NOTE
• It will go into ECO operation at the next time the air-conditioner
runs in the following case.
1
When the air-conditioner is stopped by ON/OFF button
during ECO operation.
2
When the air-conditioner is stopped in SLEEP or OFF
TIMER operation during ECO operation.
3 When the operation is retrieved from SELF CLEAN
or ALLERGEN CLEAR operation.
• When the following operations are set, ECO operation will be
canceled.
1 When the HI/ECO button is pressed again.
2 When the operation mode is changed from DRY to
FAN.
3 When the NIGHT SETBACK button is pressed.
• Not operable while the air-conditioner is OFF.
NOTE
+2ºC
-2ºC
33ºC
15ºC
33ºC
15ºC
Heat Source & Movement
COOL/DRY
HEAT
Low Normal High None
Set
temperature
Heat Source & Movement
COOL/DRY
HEAT
Low Normal High None
Set
temperature
ECO operation
Pressing the HI/ECO button initiates a soft operation with the power suppressed in order to avoid an excessive cooling or heating.
The remote control
displays.
The set temperature will be adjusted according to the amount of movement made by the person(s) the motion sensor has detected.
MODE:AUTO mode operation
MODE:COOL/HEAT/DRY mode operation
Low
When the extent of human
movement is low
High
When the extent of human
movement is high
None
When there is no movement
of human
• The set temperature is automatically
adjusted during ECO operation,
however, the indication on the remote
control display does not change.
• When the SLEEP TIMER, OFF TIMER,
and ON TIMER + OFF TIMER operation
are set, the motion sensor does not
adjust temperatures.
• When the “None” continues for 1 hour,
the FAN SPEED is set ULo.
RLF012A204_EN_1-36.indd 25RLF012A204_EN_1-36.indd 25 7/29/2017 6:11:40 PM7/29/2017 6:11:40 PM
To Next Page
Loading...
