Need help?Do you have a question about the Mitsubishi SRK45ZMP-S and is the answer not in the manual?
General| Brand | Mitsubishi |
|---|---|
| Model | SRK45ZMP-S |
| Category | Air Conditioner |
| Language | English |
Wiring diagram for the indoor unit components and connections.
Wiring diagram for the outdoor unit components and connections.
Piping diagram for SRK25/35ZMP-S models showing refrigerant flow.
Piping diagram for SRK45ZMP-S model showing refrigerant flow.
Crucial safety guidelines and warnings for installation and usage.
Key checks required before commencing installation procedures.
Criteria for selecting the optimal installation location for the indoor unit.
Criteria for selecting the optimal installation location for the outdoor unit.
Procedures and precautions for proper electrical grounding of the unit.
Instructions for correctly installing and arranging the drain hose for proper drainage.
Guidelines for performing electrical wiring connections for the outdoor unit.
Detailed steps for connecting refrigerant piping, including preparation and flaring.
Checklist of essential points to verify before powering on the unit after installation.
Explanation of the remote control buttons and their functions for operating the unit.
Protects the compressor from overheating by monitoring discharge pipe temperature.
Protects against malfunctions from serial signal errors between indoor and outdoor units.
Protects the refrigeration cycle by monitoring compressor speed and temperatures.
Controls current to prevent exceeding the set operation current limit.
Detects compressor rotor lock and stops the compressor to prevent damage.
Protects the inverter from overcurrent by stopping the compressor immediately.
Detects troubles within the outdoor unit and stops the compressor.
Important safety precautions to follow before and during maintenance work.
Procedure for diagnosing problems when the air conditioner is running but malfunctioning.
How to access service mode to view recorded error and stop data.
Table detailing error codes, stop codes, causes, and occurrence conditions.
Table mapping error codes and display patterns to causes and solutions.
Step-by-step guide for diagnosing issues when the unit does not operate.
To Next Page