Mitsubishi TPKA0A0241KA80A - Page 44

45
44
TCHT011
1
A
B
2
3
13-4-2. PAR-SL101A-E
1. Press the button to stop the air conditioner.
• If the weekly timer is enabled (
is on), press the
button to disable it ( is off).
2. Press the
button for 5 seconds.
•
comes on and the unit enters the service mode.
3. Press the
button .
•
comes on and the unit enters the test run mode.
4. Press the following buttons to start the test run.
: Switch the operation mode between cooling and heating
and start the test run.
: Switch the fan speed and start the test run.
: Switch the airflow direction and start the test run.
: Switch the louver and start the test run.
: Start the test run.
5. Stop the test run.
• Press the
button to stop the test run.
• After 2 hours, the stop signal is transmitted.