TC0169eMITSUBISHI TRITON 3 PIECE TONNEAU COVER
29/10/10Page 11 of 13
ISSUE05
IMPORTANT:
HTC LATCH & STRIKER U-BOLT FREEPLAY, SHOULD BE CHECKED AND ADJUSTED
(AS PER STEPS 29, 33 & 34) AFTER 1500 Km’s (TO ACCOUNT FOR SEAL SETTLING).
KEY IDENTIFICATION CODE
XXXXX
MITSUBISHI MN TRITON ONWARDS 3 PIECE HARD TONNEAU COVER
Please write your key identification code in the boxes above and retain.
Replacement keys can be purchased from your local Mitsubishi dealer.
CLOSE TONNEAU AND CHECK CLOSING EFFORT WITH TAILGATE CLOSED. IF REQUIRED, ADJUST THE U BOLT ACCORDINGLY BY LOOSENING
THE M6 NUTS AND MOVING THE U BOLT UP OR DOWN. ONCE ADJUSTMENT IS COMPLETE, TIGHTEN THE M6 NUTS.
FIG. 36
1
ADJUST U-BOLT
USE A RULER TO ENSURE
U-BOLT REMAINS PARALLEL
TO LOCK STRIKER
TORQUE 10Nm
4
0mm102030405060708090
21
22
2
To Next Page
Loading...
