6. STRUCTURE, MECHANISM AND ADJUSTING
OF MACHINE'S MAIN PARTS 15-20
A. Grinding head (Common to all models)
Adjustment of head-slideway clearance
B. Vertical feed system (Common to all models)
C. Cross feed system, model 250M/250MHi
D. Cross feed system, model 200M/200MHi
E. Longitudinal feed system (Common to all models)
7. ELECTRICALS 21-23
Standard AC 200-220V 60 Hz Wiring Diagram
Standard AC 460 V 60 Hz Wiring Diagram
Optional power elevation AC 200-220V 60 Hz Diagram
Optional power elevation AC 460V 60 Hz Diagram
8. OPERATION 24-25
A. Mounting grinding wheel to the spindle
B. Vertical feed of the grinding wheel
C. Cross traverse of the saddle
9. SAFETY PRECAUTIONS 26-27
10. MAINTENANCE OF THE MACHINE
A. Lubrications
B. Preventive maintenance of the machine
C. Maintenance of the steel cable for table drive
28-30
11. INSTRUCTION MANUAL FOR
AUTOMATIC LUBRICATOR 31-33
To Next Page
Loading...