Need help?Do you have a question about the Mitutoyo PJ300 and is the answer not in the manual?
Verify package includes screen, mounting hooks, and adhesive strips for installation.
Unfold the screen, find a desired wall position, and mark grommet locations.
Attach adhesive strips to the mounting hooks by removing one side of the strips.
Attach hooks to marked positions after removing the other adhesive strip side, then mount the screen.
Connect gaming system to projector via HDMI for best quality. Set projector source to HDMI.
Connect computer/laptop via HDMI or VGA. Set projector source to the correct input.
Use casting devices or HDMI adapter for smartphone connectivity. Refer to device manuals.
Enable Bluetooth on speaker and projector. Projector searches and pairs automatically.
Connect speaker to projector using a male-to-male AUX 3.5 mm cable.
To Next Page
General