Need help?Do you have a question about the MIWA LOCK ALV2 and is the answer not in the manual?
General| Brand | MIWA LOCK |
|---|---|
| Model | ALV2 |
| Category | Door locks |
| Language | English |
Detailed steps for programming a new guest door lock using the DTU, including room type and floor number entry.
Instructions for programming a new lock as a common door, specifying room type, number, and time zone settings.
Steps to program a new special door lock, referencing room type setup on PC and entering valid time parameters.
Guide to programming a new non-guest door lock, including room type selection, floor number, and time zone settings.
Procedure for clearing a lock sequence using the DTU, including selecting card types and performing the clear operation.
Instructions for uploading interrogation data to the DTU, including creating an interrogation card and specifying date ranges.
Steps to upload error logs to the DTU, detailing how to locate entries and view error data after upload.
Procedure for performing an emergency open of a lock using the DTU, including cancellation steps.
How to perform master or housekeeping lockout on a lock using the DTU, locking out cards or guest cards.
Steps to cancel a lockout on a lock using the DTU, restoring the lock to a working status.
Instructions for opening a lock when batteries are dead, involving an emergency battery pack and management card.
Explanation of lock indicator lights, including solid green, flashing red, and no lights, indicating lock status.
To Next Page