User manual - MIXER 70 202303-648-ENGP12
5. MAINTENANCE
5.1. CLEANING PROCEDURE
After every utilization of the machine :
Clean the tank with help of a water jet or high pressure washer, then tip it over to empty it.
For an optimal cleaning of the mixing blades, think of turning them during the procedure.
Also clean the security grid (A).
Once the operation is nished, close the security grid.
5.2. SERVICING
Once a week, lubricate the lubricator (D) with help of a grease pump (ref. 12566) as well as the engine
lubricator.
The direct projection of water under pressure onto the control panel has to be
stopped at the risk of water inltration into the electric box. Proceed by simply
cleaning with a humid sponge.
To Next Page
Loading...