Please turn off the helicopter if not using. If you are planning
not to play the helicopter for a long time, charge the
helicopter for about 1 hour before storing it .
Pic.3 Pic.4
Turn the power switch of the
helicopter to "OFF" position .
If the red light of the charge controller blinks quickly during charging, it means that there’s something
wrong with the charge controller. Please stop the charging right away. The charger controller can not be
used until it is well repaired.
ONOFF
Pic.5
How to charge the helicopter by split charging device (Pic 3 & 4)
� Turn off the helicopter; unplug the battery cable from the helicopter.
� Insert the plug of the battery cable into the quadrate port of the charge controller (matching the plug to the port)
Insert the plug of the charger cable into the circular port of the charge controller, then, connect the plug of the charger
to AC power outlet to start charging.
Once charging is proceeding, the red power light of the charge controller is on. When charging is finished, both the red
light and green light of the charge controller are on.
Full charge takes about 3 hours.
How to charge the helicopter by all-in-one charging device (Pic 5)
� Turn off the helicopter.
� Unplug the battery cable from the helicopter, then, insert the plug of the battery cable into the port of the charger (matching
the plug to the port) to start charging.
� Once charging is proceeding, red light is on. When charging is finished, the red light will turn into green light.
Full charge takes about 3 hours.
To meet the different demands from different customers worldwide, two different charging devices have been designed for charging.
One is split charging device (1 piece charger +1 piece charge controller), the other one is all-in-one charging device (one charger
only)The product is included with either of the two charging devices. User should check the package to confirm which charging
device is included before reading the charging method.
To Next Page
Loading...