- 3 -
MOUNTING SURFACE
Cooling requirements are considerably relaxed when mounting inside the passenger
compartment since the driver will not often allow temperatures to reach a critical
point. Floor mounting under the seat is usually satisfactory as long as there is at least 1
inch
(2cm)
above the Amplifier’s fins for ventilation.
a. Select a suitable location that is convenient for mounting, is accessible for wiring,
and has ample room for air circulation and cooling.
b. Use the amplifier as a template to mark the mounting holes. Remove the
Amplifier and drill 6 holes. USE EXTREME CAUTION, INSPECT UNDERNEATH SURFACE
BEFORE DRILLING.
c. Secure the Amplifier using the screws provided.
To Next Page
Loading...
Need help?
General
