1. 打开遥控器电源开关，遥控器信号指示灯闪烁。
2. 按下高速车电调侧面的电源开关按钮，高速车指示灯闪烁。
3. 当指示灯变为常亮后，便可操控高速车。
!
●
When turn on the transmitter, please DO NOT touch the throttle and steering.
After turn on the transmitter’s power, please operate after the indicator light
of transmitter staying on.
●
Please comply the principle of “turn on the transmitter firstly, then turn on
the high speed car”.
●
In the frequency matching, please make sure there is only one pair of
transmitter and high speed car in matching at the same time, otherwise
the frequency will match wrongly.
●
当准备开启遥控器时，请勿触动油门和转向。打开遥控器开关，遥控器指示灯点亮后才能
进行操作。
●
开机时应遵循“先开启遥控器，再开启高速车”的原则。
●
在同一时刻，请确保对码的遥控器和高速车只有一对，否则会对错遥控器。
1. Turn on the power switch of the transmitter, the signal indicator light of
transmitter flashes.
2. Press the power button of high speed car, which is on the side of the ESC;
the indicator light of high speed car flashes.
3. When the indicator light stays on, the high speed car can be operated to play.
Power Switch 开关
-5-
To Next Page
Loading...
