What to do if my MJX T38 Thunderbird Toy helicopter has no reaction?
If your MJX Toy helicopter isn't responding, there are several potential causes: * The helicopter battery may be low. Try charging the helicopter's battery. * The transmitter batteries might be weak. Replace the batteries in the remote control. * The remote control channel may not match the helicopter's channel. Adjust the channel switch to ensure they are aligned.
Why is my MJX T38 Thunderbird helicopter reaction not sensitive?
If your MJX Toy helicopter's reaction is not sensitive, consider these possibilities: * Strong light interference: Sunlight or other intense light sources may be affecting the sensor. Try moving to a location with less direct light. * Interference from other remote controls: Another RC device nearby might be emitting infrared signals on the same frequency. Relocate to an area without such interference. * Conflicting channels: Another helicopter using the same channel could be interfering. Change the channel on your RC to a different one.
Details how to charge the helicopter using the remote control and charging cable.
Instructions for charging the helicopter via USB using a computer.
Instructions for ascending the helicopter by pushing the left control stick up.
Instructions for descending the helicopter by pushing the left control stick down.
How to turn the helicopter left using the direction lever.
How to turn the helicopter right using the direction lever.
How to move the helicopter forward by pushing the right control stick up.
How to move the helicopter backward by pushing the right control stick down.
General| Category | Toy |
|---|---|
| Brand | MJX |
| Model | T38 Thunderbird |
| Channels | 4 |
| Charging Time | 90 minutes |
| Battery | 3.7V 500mAh LiPo |
| Remote Control Frequency | 2.4GHz |
| Control Range | 100 meters |
| Material | Plastic |
| Skill Level | Beginner |
| Age Recommendation | 14+ |
To Next Page
