Need help?Do you have a question about the MK Sound VX-1250 and is the answer not in the manual?
Details voltage selection and power cord attachment for proper operation.
Connects subwoofer via RCA cables to preamp-level outputs for superior bass quality.
Connects subwoofer using speaker wire from amplifier/receiver outputs.
Explains how to connect satellite speakers to the amplifier or subwoofer.
Preferred connection method for multichannel audio systems.
Steps to diagnose and fix issues when the subwoofer produces no sound.
Addresses issues with the subwoofer shutting down due to overheating protection.
Troubleshoots issues related to low volume or weak mid-bass frequencies.
Identifies and resolves sources of hum or buzz from the subwoofer.
Summarizes the 5 most important items for setting up a surround sound system.
Power| power output | 250 watts RMS |
|---|---|
| amplifier distortion | Less than 0.03% from 20 to 125 Hz at full output into the subwoofer driver |
| noise | better than -90 dB relative to full output |
Audio Specifications| typical room response | 20 - 125 Hz ± 3 dB |
|---|---|
| input impedance | 15 Kohms |
Weight and Dimensions| dimensions | 18" x 15 3/8" x 21 7/8" |
|---|---|
| weight | 52 lbs. |
To Next Page