To Next PageTo Next Page
Need help?Do you have a question about the MK Sound M&K V-125 and is the answer not in the manual?
Connects the subwoofer using speaker wires from the amplifier to the "FROM AMPLIFIER" terminals.
Connects satellite speakers directly to the subwoofer's "TO SPEAKERS" terminals, enabling a high-pass filter.
Connects satellite speakers directly to the amplifier, bypassing the subwoofer's high-pass filter.
Connects the subwoofer to preamp-level sources using RCA interconnect cables for better bass quality.
Explains how to use M&K's electronic high-pass filters for improved system performance and bass signal filtering.
Details connecting the subwoofer to A/V receivers or processors via subwoofer output jacks.
Steps to diagnose and resolve a complete lack of audio output from the subwoofer.
Explains the protection circuit that may activate due to overheating at high volumes.
Addresses issues with low output when using speaker wire connections from the amplifier.
Suggests checking phasing and connections when the midbass transition between speakers is weak.
Addresses a thump sound when using preamp inputs, suggesting an alternative connection.
Provides steps to identify and eliminate hum or buzz originating from the subwoofer or system.
Guides on diagnosing unusual noises by isolating the subwoofer from input signals.
General