MKN FlexiCombi MagicPilot FKECOD115

Need help?

Do you have a question about the MKN FlexiCombi MagicPilot FKECOD115 and is the answer not in the manual?

Summary

2 Safety Information

Improper Installation Risks

Risk of damage and injury from incorrect installation, modification, or non-original parts.

Transportation and Storage Safety

Electrical Connection Safety

Risks of fire and electric shock from improper electrical connection.

Commissioning Safety

3 Description of the Unit

3.3 Equipment and Connection Data

Details unit dimensions, weight, emissions, operating environment, and power connection data.

4 Transporting the Unit

4.1 Transporting to Installation Site

4.2 Unpacking the Unit

5 Setting Up the Unit

5.1 Maintaining Minimum Clearances

Specifies required clearances to walls, ceilings, and other equipment for safe operation.

5.2 Lifting Unit Off Pallet

5.3 Setting Up on Equipment Legs

5.4 Setting Up on Base Frame

6 Connecting the Unit

6.2 Making Power Connection

Guidelines for connecting the unit to the electrical mains, including cable requirements.

Permanent Electrical Connection

Safety precautions for permanent electrical connections, including disconnect switches.

Plug-in Connection

Safety precautions for plug-in connections, ensuring accessibility and socket standards.

Equipotential Bonding

Requirement for including the unit in a potential equalization system for safety.

6.2.1 Matching Connection Voltage

Procedure for verifying and matching the unit's voltage to the site connection.

6.2.2 Connecting Power Cable

Detailed steps for connecting the electric power cable to the unit's terminals.

6.2.4 Potential Equalisation Circuit

6.4 Basic Control Setting

6.5 Water Connection

Guidelines for making water connections, emphasizing authorized contractors and water quality.

6.5.1 Tap Water Connection Line

6.5.2 Softened Tap Water to Both Connections

6.6 Wastewater Connection

Guidelines for wastewater connection, including regulations and waste traps.

6.6.1 Wastewater Line to Permanent Connection

6.7 Exhaust Air Connection

6.7.1 Connecting Exhaust Air Line

7 Testing the Function

7.1 Checking the Controls

7.2 Monitoring Cooking Zone Door

7.3 Running Self-Diagnosis

8 Putting the Unit into Service

8.1 Filling Out Commissioning Report

Guide to completing the commissioning report for electrical, water, and network connections.