To Next PageTo Next Page
Need help?Do you have a question about the MKS Baratron 220D and is the answer not in the manual?
General| Output Signal | 0-10 VDC |
|---|---|
| Type | Capacitance Manometer |
| Electrical Connection | D-subminiature connector |
| Power Supply | ±15 VDC |
| Fitting | 1/4" VCR |
Explains meanings of WARNING, CAUTION, and NOTE signs used in the manual.
Details symbols that are physically present on the unit itself.
Outlines essential safety precautions for operating and handling the instrument, covering points on pages 12-13.
Provides an overview of the MKS Type 220D Pressure Transducer and its capabilities.
Explains the manual's structure and provides information on obtaining technical support and service.
Guide to unpacking the unit, interface cable selection, and generic cable descriptions.
Specifies location, environmental, safety requirements, setup, dimensions, and mounting instructions.
Details AC/DC electrical connections, fuse information, voltage selection, and output connector pinouts.
Explains the internal electronic circuitry and signal conversion process of the transducer.
Describes power supply configurations, current output options, and overrange conditions.
Information about serial number labels, fuse, and line voltage identification on the unit.
Step-by-step instructions for zeroing the transducer, including warm-up time and pressure requirements.
Guidance on checking for damage, cleaning the unit, and general maintenance procedures.
Detailed procedure for safely replacing fuses in the unit.
Lists common technical specifications such as accuracy, dimensions, operating temperature, and output signals.
Details specifications specific to AC and DC powered versions, including CE compliance and power requirements.
Explains how the model code is structured and identifies different options for ordering the transducer.
Details the ordering codes for full scale range, fittings, input power, and output signal.
