Ⅸ
.TFT touch Screen User interface configuration
9.1 Conventions:
If the customer needs to customize the display picture of the touch screen, the first should follow the following
conventions:
1 . Scope of customization:
A. Power-on interface logo;
B. Picture of the button (see below "1" and "2") (including icons and text);
C. Screen background color (see below figure "3", default black);
D. Title text color (see below figure "4", default white);
E. Display the background color of the state of the temperature (see figure "5", the default dark blue);
F. Display the color of the state such as temperature (see below figure "6", the default white);
G. " Select the file interface, the font color of the file name (see figure "7", the default white);
H. " Select the file interface, the font background color of the file name, and suggest the same color as the picture;
I. " Printing "interface, printing status information text background color; (See figure" 8 ", default white);
J. " Printing interface, print status information font color, suggest and picture color is the same;
K. Whether the button requires a 3D effect, the default is that the need, that is, the button picture outside the white
(1)Custom boot logo picture, TFT24,28,32(wide =320 pixel, high =240 pixel;) ,TFT35(wide =480 pixel, high =320 pixel;)
(2) Custom button picture, TFT24,28,32(wide =78 pixel, high =104 pixel;) TFT35(wide =117 pixel, high =140 pixel)
(3) The name of the customized picture must be named in accordance with the appendix;
(4) Custom color value is 16, in accordance with 3 primary colors blue, green, red order;
To Next Page
