MKT V-2Esc - Excavator Requirements

EXCAVATOR REQUIREMENTS | 11
IV. EXCAVATOR REQUIREMENTS
A. The excavator size, stick width and pin dimensions must be compatible with the
Rototilt width, pin dimensions and size restrictions.
B. The excavator must be equipped with a uni-directional auxiliary circuit that can
supply40gpmtotheV-2Escat2,500psi.Theauxiliarycircuitowmusthavepriority
overtheboomandstickfunctions,orgreaterowandadditionalmodicationsmay
be required to maintain hammer speed when operating boom or stick functions.
C. Theauxiliaryhydrauliccircuitmustsupplyatleast40gpmandmustowoilinone
directiononly(uni-direction),itcannothavereverseow,ordamagetotheV-2Esc
hydraulic manifold may result. The circuit should be controlled by an electric on/off
switch, not a bi-directional foot pedal