MNC Chill Cube - App Download and Installation; App and Speaker Synchronization; Controlling Speaker Lights; Speaker Light Mode Selection

Note:Tocancelthepairingmode,eitherpressthePOWER/LIGHTBUTTONon
thespeakerfor3secondsorpressthePOWERBUTTONontheremote.The
speakerwillannounce“PowerO”andturno.
DOWNLOADING FREE APP
GototheiTunes®AppStoreorPlay™(forAndroiddevices)toSpeakerApp,
“MNC”.
SYNCING APP AND SPEAKER
1. OnceaBluetooth®connectionhasbeenmadebetweenyourdeviceand
theChillCubeSpeaker(pleaserefertopage15forpairinginstructions),
opentheMNCapponyourdevice.
2. SelecttheChillCubemaincategorythroughyourdevice’sscreenthen
selecttheChillCubedevicefromthelist.
USING THE LIGHTS
1. PressthePOWER/LIGHTBUTTONonthespeakerortheLIGHTBUTTON
ontheremotetoturnthelightsontoBeatmode.
2. Whenthecolorselectedissolid,presstheBRIGHTNESS+BUTTON/
-BUTTONontheremoteorintheChillCubeapptoincrease/decrease
thelightbrightness.
3. PressthePOWER/LIGHTBUTTONonthespeakerortheLIGHTBUTTON
ontheremotetoturnthelightso.
SELECTING LIGHT MODES
1. PresstheFLASHBUTTONontheremoteorintheChillCubeapptoacti-
vatetheFlashmode,afasttransitionofRed,Green,Blue,Purple,Yellow,
Cyan,OrangeandWhitelights.
2. PresstheSTROBEBUTTONontheremoteor in the ChillCubeapp to
activatetheStrobemode,afastashofthelastcolorselected.
3. PresstheFADEBUTTONontheremoteorintheChillCubeapptoacti-