EasyManua.ls Logo

MO-SYS L40 User Manual

MO-SYS L40
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MO-SYS L40
MANUAL AND USER GUIDE
Question and Answer IconNeed help?

Do you have a question about the MO-SYS L40 and is the answer not in the manual?

MO-SYS L40 Specifications

General IconGeneral
CompatibilityCameras and lenses
Tracking TechnologyOptical
Power Supply12-24V DC
PayloadUp to 40 kg
ControlEthernet
MountingTripod

Summary

System Cabling Setup

Console Connection

Diagram showing the console connection within the system cabling setup.

Optional Components

Diagram illustrating optional components in the system cabling setup.

PSU Connection

Diagram showing the PSU connection in the system cabling setup.

Terminator Connection

Diagram showing the terminator connection in the system cabling setup.

Gyro Settings and Head Sensitivity

General Gyro Controls

Adjust Pan, Tilt, Roll modes and speeds via the console window.

Gyro Calibration Procedure

Calibrate Gyro by disabling head and using Anti-Drift Recalibrate.

Backpan Configuration

Choose Backpan on or off for head use with crane, adjust based on rotation needs.

Axis Sensitivity and Gyro Enabling

Axis Sensitivity Adjustment

Adjust PAN, TILT, and ROLL sensitivity separately, reducing PAN for stability.

Enabling Gyro and Testing

Enable gyro and head, then test performance by swinging head and adjusting PAN.

Unused L-40 Buttons

Note on highlighted buttons not used in the Mo-Sys L-40 head setup.