EasyManua.ls Logo

MOA A010 - Unit Placement Guidelines; Initial Placement Procedures; Unsuitable Placement Conditions

MOA A010
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Portable Airconditioner - English manual
14
EN
PLACEMENT
1. If tipped more than 45°, allow the unit to set upright for at least 24
hours before start up.
2. Place the unit on a rm, level surface in an area with at least 50cm
of free space around it to allow for proper air circulation.
3. Do not operate in close proximity to walls, curtains, or other objects
that may block air inlet and outlet. Keep the air inlet and outlet free of
obstacles.
4. Never install the unit where it could be subject to:
- Heat sources such as radiators, heat registers, stoves or other products
that products that produce heat.
- Direct sunlight
- Mechanical vibration or shock
- Excessive dust
- Lack of ventilation, such as cabinet or bookcase
- Uneven surface
WARNING
Install the unit in rooms which exceed 12 m².
Do not install the unit in a place where inammable gas may leak.
NOTE
The manufacture may provide other suitable example or may provide
additional information about the refrigerant odour.

Related product manuals