MOA A010 - Operating Modes; Cooling and Ventilating Modes; Drying and Heating Modes

Portable Airconditioner - English manual
19
EN
2. Operation mode:
The unit has ve operation modes: Fan, Auto, Cool, Dehumidier,
Sleep.
A.Cooling your room
Select the cool mode to lower the temperature in your room.
- Press MODE button repeatedly until the LED of COOL operation lights
up.
- Press ADD/MINUS button to adjust the temperature which is displayed
on the screen. The temperature can be set between 16ºC and 32ºC.
- Press SPEED button repeatedly until the desired fan speed indicator
lights up.
To control the direction of the air ow horizontally, please adjust the
inner louver by hand. To control the direction of the air ow vertically,
please press the SWING button on.
Note: The air conditioner stops if the room temperature is lower than
selected temperature.
B. Ventilating your room:
- Press MODE button repeatedly until the LED of FAN operation lights
up. In ventilation mode the room air is circulated, but not cooled.
- Press SPEED button repeatedly to select the fan speed as desired.
C. Drying your room:
- Press MODE button on the control panel or remote control, the LED of
DRY operation lights up. The fan speed is unable to select. User should
connect the hose to the drain outlet at the bottom of the unit.
Note: In this mode, the fan speed switches over to low speed and
cannot be selected.
B. Heating your room(Optional for Heating Function Unit only):
-Press MODE button repeatedly until the HEAT indicator lights up.
-Press Up/Down button to set the temperature higher than the room
temperature. The fan speed can also be set.
Note: The drainage hose should be attached to the unit for continuous
operating.