MOA FP511 - Vegetable and Fruit Mixing Guide; Soy Milk Making Instructions; Troubleshooting Common Issues; Unit Not Operating or Responding

Food Processor - English manual 10
EN
Vegetable or fruit mixing
For vegetable or fruit to be mixed, after peeling or shelling, and pitting,
cut it into blocks or sections,every time put 600g, pour appropriate cool
boiled water, perform assembly according to assembling specication
for use turn on for mixing for 1min by 5 grading.
Soy milk making
1. For making soy milk, immerse soy in water for 4 hours. Assemble
soy milk maker;put lter net vertically in and make it clutch with the
mixing cup according to the legend, put the cover on, take off the
feed cover, put some immersed soy into the lter net, pour appropriate
water, total quantity of water and soy shall not be over maximum level
(MAX), fasten the top cover, turn on the machine for mixing for 1 min.
Repeating twice can get better effect. (It is recommended that soy
quantity is 150 g, and water quantity 1L.)
2. If soy milk is too dense, pour it out, add some water for diluting.
TROUBLESHOOTING GUIDE
Unit does not operate on any speed or Pulse
1. Is the unit plugged in? Does the outlet work?
2. Are the bowl, bowl lid, and food chute lid all locked in place? See
pp. 4-“How to Assemble.”
Food is not chopped, sliced or shredded uniformly
1. Packing too much food in the food chute, or pushing too hard on the
food pusher may cause the processed food to be irregulary sliced or
shredded. Refer to the food processing charts for recommended sizes
and quantities.
Unit stops and will not come back on
1. Are the bowl, bowl lid, and food chute lid all locked in place?
They may have moved slighty during processing. See pp. 4 “How to
Assemble.”
2. Is the outlet still working? Check it by plugging in a working lamp or
other appliance. You may have overloaded the circuit and blown a fuse
or tripped the circuit breaker.
3. Turn unit OFF, allow to stand for 3 to 4 minutes, then turn back ON.
If none of these suggestions correct the problem,DO NOT attempt to
repair the unit. Call the Customer Service number to get the name of
your nearest Authorized Service Center.