Food Processor - English manual 11
EN
Unit has a burning smell
1.There may be a residue left on the motor from the manufacturing
process, causing a slight odor during initial use. This will go away.
If a strong odor or any visible smoke appears, unplug the unit
IMMEDIATELY and call the Customer Service number.
Motor seems weak
1. Are you using the recommended speed for the item you are
processing?
2. Are you using the recommended food size and quantity to be
processed? Refer to the food processing charts for recommended food
sizes and speeds.
CLEANING, STORAGE AND
MAINTENANCE
1. Wash bowl, lids, blade, discs,removable drive sleeve and food
pusher in hot, soapy water. Rinse and dry thoroughly. See page 4 for
information on how to remove food chute lid for cleaning. To clean
food thoroughly from the bowl and bowl lid/food chute,immerse in
hot,soapy water. NOTE: Do not store unit with lid in locked position;
this may put strain on interlock tab.
2.Wipe base, control panel, and cord with a damp cloth or sponge. To
remove stubborn soil, use a mild non-abrasive cleanser.
3.To store, place bowl on base. Then place Chopping/Mixing Blade on
motor shaft and Slicer/Shredder Disc on Chopping/Mixing Blade. The
Removable Drive Sleeve may be stored in the bowl. Place lid on bowl
but do not lock.
4.Monthly place a drop of vegetable oil on each screw in the food
chute.
To Next Page
Loading...