TECHNICAL CHARACTERISTICS
· Material: ABS/PC/PVC/TPE
· Product Color: White
· Laser Wavelength: 520nm
· LED Power: <0.4mW
· Control Mode: Remote control
· Range: <5meters(Best distance)
· Power Supply: 100 - 240V~50/60Hz 0.4A
· Work Input: 5V=1A
· Product Size: 120*113*228mm
· Applicable Environment: Indoor Home
(Better in a dark environment)
· Working Temperature: 10°/40°C
PRODUCT FEATURES
· 360° rotation of the magnetic head
· RGB color
· Nebula brightness and speed
adjustment
· Stars brightness and speed
adjustment
· Adjustable arm angles
· The product needs to be connected
to the power cord for use.
PACKAGING ACCESSORIES
1. USB cable *1
2. Instruction manual * 1
3. Remote
The light source of stars and nebula is strong, so eyes should not look directly at the
light source. Keep the lamp's light beams and star lasers away from children. Mobility
On Bord cannot be held responsible for any physical or material damage caused by
the Galaxy Light.
The brightness of the stars (ie laser brightness) is affected by the ambient
temperature and time of use. When the ambient temperature is hot or the power-on
time is longer, the brightness of the laser will decrease due to the heat of the light
source. At this time, just turn off the power and let the laser emit the heat dissipation
of the device (heat dissipation time usually takes more than 15 minutes) and then
turn it on to restore the brightness.
The head and body of the astronaut are connected together by magnets, and the
direction of the head can be adjusted. Do not stretch the astronaut's head and body
forcefully, otherwise the wires may break due to strething.
Please install the
base before using.
Please make sure
that the astronaut’s
feet are in full
contact with the
bottom of the base
seat.
The projection direction
can be adjusted by
adjusting the rotation
angle of the astronaut’s
head.
Do not put into the eyes or look at the lasers and the light
beam of the lamp.
ATTENTION
To Next Page
Loading...