A40 Operating the cooler
11
The device cools with a maintenance-free absorber circuit. Concentrated
ammoniac solution is heated in a boiler and then driven out in gaseous form.
The gas which is subjected to high pressure, is liquefied in a condenser and
then evaporated by adding hydrogen. This removes warmth in the cooling area.
6 Operating the cooler
!
I
6.1 Energy saving tips
Choose a well ventilated installation location which is protected against
direct sunlight.
Allow warm food to cool down first before placing it in the device to keep
cool.
Do not open the cooling device more often than necessary.
Do not leave the cooler unit open for longer than necessary.
Arrange the food in the cooler so that air can circulate inside.
6.2 Using the cooler
A
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
NOTE
Before starting your new cooler for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and maintenance” on
page 16).
NOTICE!
Ensure that the objects placed in the cooler are suitable for
cooling to the selected temperature.
Ensure that food or liquids in glass containers are not exces-
sively refrigerated. Liquids expand when they freeze and can
thus destroy the glass containers.
To Next Page
Loading...
