Intended use B40 AC/DC
8
5 Intended use
In compressor mode the cooler is suitable for cooling and deep freezing food-
stuffs. In thermoelectric mode the cooler is only suitable for cooling food-
stuffs.
The device is designed for use with:
a 12 V vehicle electrics socket of a car (such as a cigarette lighter), boat or
caravan (see voltage specification on the type plate)
a 230 V AC mains supply
The appliance may also be used for camping use. The appliance shall not to
be exposed to rain.
!
6 Technical description
The hybrid cooler is suitable for portable use. It is equipped with two separate
cooling systems. The device features a Peltier cooling system with heat dis-
charged by a fan, as well as a compressor cooling system. The cooling sys-
tem is non-wearing.
In thermoelectric mode (connection to 12 Vg), it can cool goods down to max.
20 °C below ambient temperature and keep them cool. In compressor mode
(connection to 230 V), it can cool goods down to –15 °C and keep them cool.
In compressor mode, you can use the continuously variable thermostat to set
the temperature within a range from +12 °C to –15 °C.
6.1 Description of the device
CAUTION! Health hazard!
If you wish to cool medicines, please check if the cooling capacity
of the device is suitable for the medicine in question.
No. in
fig. 2, page 2
Description
1 Handle
2 Ventilation slots
3 Thermostat
B40-O-16s.book Seite 8 Montag, 5. März 2018 5:53 17
To Next Page
Loading...
Need help?
General
