Operation FR35 AC/DC
14
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the heated
air can dissipate.
I
➤ Close the cooler, see chapter “Connecting the cooler” on page 12.
A
➤ Press the “ON/OFF” button (fig. 2 1, page 3) for between one and two
seconds.
✓ The “POWER” LED (fig. 2 2, page 3) lights up.
✓ The display (fig. 2 5, page 3) switches on and shows the current cooling
temperature.
I
✓ The cooler starts cooling the interior.
I
6.6 Locking the cooler
➤ Close the lid.
➤ Press the lock (fig. 1 1, page 3) down, until it latches in place audibly.
NOTE
Place the cooler as shown (fig. 4, page 4).If you operate the box
in a different position it can be damaged.
NOTICE! Danger from excessively low temperature!
Ensure that only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED “POWER” flashes
orange.
To Next Page
Loading...
