Operation MCF32/MCF40/MRF 40/MCF60 AC/DC
12
Connectors (fig. 3, page 4)
6Operation
6.1 Before initial use
I
Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit.
Proceed as follows:
1. Switch on the cooling device.
2. Press the “SET” button twice.
3. Use the “+” and “–” buttons to select Celsius or Fahrenheit.
✔ The selected temperature units then appear in the display for a few
seconds. The display flashes several times before it returns to the current
temperature.
6.2 Saving energy
Choose a well ventilated location which is protected from direct sunlight.
Allow warm food to cool down first before placing it in the cooling device
to keep cool.
Do not open the cooling device more often than necessary.
Item Description
1AC socket
2 Fuse holder
3 Cover AC socket
4 Cover DC socket
5DC socket
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter “Cleaning and mainte-
nance” on page 17).
To Next Page
Loading...
