P40, W40 Operation
9
5 Operation
I
Note
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter “Cleaning and mainte-
nance” on page 10).
5.1 Energy saving tips
z Choose a well ventilated installation location which is protected against
direct sunlight.
z Allow warm food to cool down first before placing it in the device to keep
cool.
z Do not open the cooling device more often than necessary.
z Do not leave the cooler unit open for longer than necessary.
5.2 Using the cooler
I
Note
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the DC connection cable (fig. 1 2, page 3) to the cigarette light-
er or a DC plug socket in the vehicle.
or …
➤ Connect the 230 V connection cable (fig. 1 3, page 3) to the 230 V AC
mains supply.
I
Note
Close the box tightly by pushing down the lid.
✓ The cooler starts cooling the interior.
_P40_W40.book Seite 9 Donnerstag, 2. Dezember 2010 1:55 13
To Next Page
Loading...
