- 7 -
Getting started with your MobiFren
MFB-E3000 Series are easy to use for everyone
* Before you use MobiFren Bluetooth earphone, you need to pair it with your mobile phone or Bluetooth
enabled device.
Step1 : Entering into pairing mode with Bluetooth earphone
- Press button till LED is continuously on for about 4 seconds at power-off.
(You need to pair in your mobile within 3 minutes.)
Step2 : Pairing by mobile phone
➀ Activate Bluetooth function in your mobile phone according to phone manual and search MFB-E3000
Series and select, then, it shows "Pairing".
(Some mobile phones need pass key(PIN), then, enter 0000.)
➁ If pairing is successful, it shows that " Connected to phone and media audio" and blue LED glitters for
5 times. Now, it's ready to use.
※ Pairing will be more easy with MobiFren_GT application.
➀ Install "MobiFren_GT" from Google play store.
➁ Press the first menu "Pair (Connect) earphone ", then it goes to Bluetooth setting.
➂ Activate Bluetooth and search earphone.
➃ Select "MFB-E3000 Series" from the searched devices, then it pairs.
※ Useful tip (3 ways to go Bluetooth setting)
➀ Setting, Bluetooth on wallpaper.
➁ Drag down the screen and press Bluetooth icon.
➂ Run MobiFren_GT app. and select the menu " Pair (Connect) earphone".
※ Pairing process may be different from mobile phone makers. Please refer to mobile phone's manual.
※ It's possible to pair up to 8 Bluetooth enabled devices and can use 2 devices simultaneously.
(App related functions which are not Bluetooth basic functions like as call or listening music shall be
connected with only one device, so, we recommend to connect with one mainly used device.)
1) Setting Multi point
- Please pair MFB-E3000 Series to the first device according to the pairing process.
(Refer to pairing process)
- Turn off MFB-E3000 Series.
- Please pair MFB-E3000 Series to 2nd device according to pairing process.
1. Pairing to your mobile phone
To Next Page
Loading...