EasyManua.ls Logo

Mobile Crossing BLUETOOTH GPS - Usage Tips and Best Practices

Mobile Crossing BLUETOOTH GPS
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
9. When a location fix has been obtained the
satellite reception lamp on the receiver will
begin to flash and the application should report
that that the position has been obtained.
10. The unit is now ready and can be used as
desired.
Tips
Do not cover the internal antenna with anything. The
GPS signals are easily blocked. The Bluetooth antenna
is also in this area.
The GPS will attempt to get a lock anytime it has
power. Turn off power when inside to avoid long lock
times later due to the GPS giving up and thinking it has
to initialize itself.
Get a position lock before driving off or entering the
woods where reception may be more difficult. The GPS
can hang onto a lock easier than it can get one.
Only one program can talk to the GPS at a time. If you
have trouble connecting to the GPS, be sure that some
other program is not using it.