STACKER INSTRUCTION MANUAL
The Mobile Stackers are lifting devices featuring easy, flexible, reliable and safe operation suitable for transportation of loads in
such applications as warehouses, manufacturing facilities, storerooms and workshops, and require no special training or
certification.
In order to help you use this piece of equipment correctly, please read the instruction manual carefully before operating.
Unauthorized operation is forbidden. Failure to adhere to these points can result in damage to the truck and/or injury to the
operator.
ATTENTION:
1. Overloading is not permitted. All operation should be conducted within the rated load capacity.
2. Never stand or sit on the stacker while in operation.
3. The operator should only operate the stacker while they are positioned behind the machine.
4. Do not operate the stacker if there are people in front of the unit.
5. Never put your hands, feet or any other part of your body underneath the frame, fork or platform assembly.
6. Make sure that loads are evenly distributed on the forks or platform. Do not concentrate loads at one point or
load one fork more than the other. If the load is shorter than the forks or the platform, the load should always be
placed at the back of the forks or the platform against the backrest. Never lift loads with only one fork, or with the
tips of the forks or the platform as this may damage or tip the stacker.
7. Never move the truck while raising or lowering the forks or platform.
8. Do not allow your stacker to drop from one level to another. A drop of one inch more than doubles the load
during impact which can result in bending or breaking components of the truck.
9. Always ensure that the load is stable and secure before moving to eliminate the possibility of load shifting.
10. When not in use, the forks or platform should be lowered to avoid potential injury.
11. The stacker is designed to be used on a flat and hard surface. Applying the brake is recommended for
applications involving a slope.
To Next Page
Loading...