MobileVision M115C - General Operation; Powering On and Input Source Selection; Volume and Monitor Adjustments

4
Adjusting the Speaker Volume
Press the or button on the remote to adjust the
volume level of the rear speaker.
General Operation
Turning the Monitor On:
The monitor is operational by activating the ignition
key then manually pressing the power switch on the
unit.
Selecting the Input Source
P ress to select a video source Aux 1 (RCA Input) and
Aux 2 (Camera Input).
Note: When the vehicle is put into reverse the camera
image will automatically override the video source
image.
VIDEO
SELECT
MENU
MODE
SELECT
LCD REMOTE
Monitor Adjustment
To access the monitor adjustments features, press the
remote’s Menu button.
Menu functions:
• Brightness
• Contrast
• Hue
• Saturation
• Display Ratio
• Language
• Mode
• Auto Power Down
• Reset
• Exit
VIDEO
SELECT
MENU
MODE
SELECT
LCD REMOTE
VIDEO
SELECT
MENU
MODE
SELECT
LCD
REMOTE
To adjust the selected menu function, press or
button on the remote. After adjustment has been made
wait 6 seconds and the pop-up menu will disappear.