14 15
Presets
CRAFTrhythm comes with 64 samples, 16 preset patterns and 8 preset kits. You can save your
own samples, patterns and kits over any of these.
Patterns
Patterns are 8 tracks of 16 steps that can be loaded and saved.
To load a pattern, hold down “SHIFT” then press and release one of the buttons 1-16.
To save a pattern do the same process but press and hold one of the buttons 1-16 until the
LED animation has completed.
Patterns can be chained up to 16 patterns by not releasing “SHIFT” and selecting more than
one button 1-16.
For example if you wanted 3 sections of pattern 1 followed by 1 section of pattern 2 you
would hold down “SHIFT”, press button 1 three times, then button 2 once and then release
“SHIFT”.
When adding patterns into the chain the LEDs above the buttons 1-16 will show how many
patterns are currently in the chain.
When the chain is playing a flashing LED will indicate what the currently playing pattern is by
flashing above the corresponding slot button.
Kits
Kits are the sample engine parameters for the 8 different tracks that can be loaded and saved.
To load a kit, hold down the “SELECT” button then press and release one of the buttons 1-8.
T
o save a kit do the same process but press and hold one of the buttons 1-8 until the LED
animation has completed.
To re-load all factory preset patterns and kits, hold any 5 touch pads and then press the
“SELECT” button. This will overwrite any patterns and kits you have made!
You can send CRAFTrhythm program change MIDI messages to change kits, which means you
can automate kit changes during a composition from your DAW!
Default Presets
Patterns
Pattern Number Pattern Name
1 Function
2 Big Cheese
3 Automate
4 Creeper
5 Oddjob
6 Periscope
7 Stand-In
8 Anvil
9 Sledge
10 Game Over
11 Get Funky
12 Street Sweeper
13 Goldfinger
14 Submerge
15 Bell Rider
16 Knuckles
Kits
Kit Number Kit Name
1 Industry
2 Mousetrap
3 Technologic
4 Slowmo
5 Double 0
6 Sonar
7 Backline
8 Concrete
To Next Page
Loading...