To Next PageTo Next Page
Need help?Do you have a question about the modbar STEAM Series and is the answer not in the manual?
General| Brand | modbar |
|---|---|
| Model | STEAM Series |
| Category | Kitchen Appliances |
| Language | English |
Covers professional use, tap position, outdoor use, and general precautions.
Details on safeguards, intended use, electrical safety, and maintenance preparation.
Covers freeze prevention, wiring, disconnection, counter installation, fuses, kitchen restrictions, and RCD.
Details counter thickness, clearances, hot boiler water, and plumbing parts for installation.
Covers water pressure, grounding, strain relief, and voltage limits for safe installation.
Explains power switch function, priming, accessories, and water testing.
Details water supply connection, recommended water quality, and waste water drain setup.
Advises caution with hot steam taps, water splashing, and intended use for hot drinks.
Covers initial boiler filling, priming, and waiting for the machine to reach operating temperature.
Details how to steam milk or other liquids, including foam creation and temperature control.
Explains steam tap operation and pressurestat adjustment for steam pressure regulation.
Covers safe cleaning methods, professional access, freeze prevention, and hot component warnings.
Instructions for cleaning the drain collector and the machine's exterior body.
Procedures for cleaning steam nozzles, water filter, and steam boiler depressurization/draining.
Steps for disconnecting power, water supply, and drain connections for removal.
Information on proper disposal of electrical and electronic waste for environmental protection.
Includes draining boiler water, checking o-rings, water hardness, solenoids, plumbing, switches, probes, and gicleurs.
Involves inspecting wiring, safety switches, temperature probes, and bolt tightness.
Requires checking boiler interior condition and rinsing with approved cleaning products.
Addresses modules not heating and safety reset switches being activated due to temperature or component failure.
Covers taps not dispensing due to water level or pressure, and leaks from ball fittings indicating o-ring wear.
Explains that the boiler may not fill if water is off or water pressure is inadequate.
