Why is the water temperature too high in my Modena Casella?
If the water temperature of your Modena Water Heater is too high, it's likely due to failures within the temperature control system. Contact MODENA Call Center for repairs.
What to do if my Modena Casella is leaking?
If your Modena Water Heater is leaking, possible causes include a seal problem at the pipe joints, a leak from the plumbing connection, or a leak at the gasket. Try these steps: * Seal up the joints. * Tighten the connection. * Tighten the element or replace the gasket and contact MODENA Call Center to repair.
Why is the water temperature not warm enough in my Modena Casella?
If the water temperature from your Modena Water Heater isn't warm enough, it could be due to several reasons: * The heating element may be deactivated: Replace the heating element and contact MODENA Call Center to repair. * There may be a temperature controller malfunction: Contact MODENA Call Center to repair. * There might be no power to the water heater: Check the power supply.
What to do if no water is coming out of the hot water outlet of my Modena Casella Water Heater?
If no water is coming out of the hot water outlet of your Modena Water Heater, the reasons might be: * The water supply is cut off: Wait for restoration of the water supply. * The hydraulic pressure is too low: Use the heater again when the hydraulic pressure is increased. * The inlet valve of running water is not open: Open the inlet valve of running water.
What to do if no water is coming out of my Modena Casella Water Heater?
If no water is coming out of your Modena Water Heater, there could be several reasons. First, the water supply might be cut off; in this case, wait for the water supply to be restored. Second, the hydraulic pressure may be too low; try using the heater again when the hydraulic pressure increases. Finally, the inlet valve of running water might not be open; make sure to open it.
Why is my Modena Casella leaking?
If your Modena Water Heater is leaking, it could be due to a few reasons. It may be a seal problem with the joint (connection) of each pipe, in which case you should seal up the joints. It could also be leaking from a plumbing connection, so try tightening the connection. Alternatively, there might be a leak at the gasket, so tighten the element or replace the gasket.
Why is my Modena Casella water temperature not warm enough?
If the water temperature of your Modena Water Heater is not warm enough, it could be due to a few reasons: the heating element might be deactivated (in this case replace the heating element), there could be a temperature controller malfunction, or there may be no power to the water heater (check the power supply).
What to do if the water temperature is too high in my Modena Casella?
If the water temperature in your Modena Water Heater is too high, it is due to failures of the temperature control system. Contact MODENA Customer Care for repairs.
What to do if the heating indicator light is off on my Modena Casella?
If the heating indicator light is off on your Modena Water Heater, it is due to failures of the temperature controller. Contact MODENA Customer Care for repairs.
General| Model | Casella Series |
|---|---|
| Brand | Modena |
| Category | Water Heater |
| Water Proof | IPX4 |
| Rated Voltage | 220 V |
| Rated Frequency | 50 Hz |
| Safety Features | Thermostat |
| Warranty | 1 Year |
To Next Page
